About this model

X-Banner — three-dimensional model of the nominal 60×160 cm configuration, with frame, reverse and supports modelled individually. 1 X-Banner of 60×160 cm with rPET/blockout print. Four rods, central joint, rear leg and four eyelets. The depicted graphic was obtained through UV coordinates on the official photograph without changing its pixels. The scale allows assessment of presence and proportions in a space; unpublished hardware and measurements are visual approximations, not a technical manufacturing drawing. Illustrative 3D model at approximate scale. The dimensions shown relate to the reconstruction; feet, thicknesses and components without complete dimensions were estimated from the official references. Do not use as a technical or manufacturing drawing. Nominal dimensions available in the official catalogue: 60 × 160 cm (W × H); 80 × 180 cm (W × H); 80 × 200 cm (W × H). These dimensions do not necessarily represent the total overall bounds including bases and accessories. Product reference: https://poster.digital/loja/x-banner/ 3D reconstruction notes: 60×160 cm banner with a slight physical tilt, ground clearance and tripod approximated from the photographs. The yellow face of the narrower variant is sampled from the original; the reverse is black. GLB in metres, Y up, front +Z and floor Y=0; orthogonal front with theta 0°, phi 90° and orientation 0°. Original file embedded in the GLB and packed in Blender. Studio, camera and lights excluded from the GLB. Model dimensions include hardware; they do not replace confirmed manufacturer technical dimensions.