About this model

Tenda 3x4.5 Personalizada — approximate three-dimensional reconstruction. Assembled 4300(W)×3160(H)×2920(D) mm; the nominal 3×4,5 m name is not the assembled overall size. Assembled dimensions of 4.3×3,16×2.92 m taken explicitly from the description; the tent's commercial name does not replace these dimensions. Valance and scissor-frame heights, profile sections, roof slope/sag and small hardware visually estimated. Open configuration as in the main image, without walls. Rear surfaces repeat the documented roof and valance graphics; no separately confirmed artwork exists for these faces. Full and half-height sidewalls with hook-and-loop fastening, not shown. Anchoring weights and pegs, not shown. The AR scale includes the modelled overall bounds; it is not a technical drawing or a manufacturing dimension. Illustrative 3D model at approximate scale. The dimensions shown relate to the reconstruction; feet, thicknesses and components without complete dimensions were estimated from the official references. Do not use as a technical or manufacturing drawing. Nominal dimensions available in the official catalogue: 430 × 316 × 292 cm (W × H × D). These dimensions do not necessarily represent the total overall bounds including bases and accessories. Product reference: https://poster.digital/loja/tenda-3x4-5-personalizada/ 3D reconstruction notes: Assembled dimensions of 4.3×3,16×2.92 m taken explicitly from the description; the tent's commercial name does not replace these dimensions. Valance and scissor-frame heights, profile sections, roof slope/sag and small hardware visually estimated. Open configuration as in the main image, without walls. Rear surfaces repeat the documented roof and valance graphics; no separately confirmed artwork exists for these faces. GLB in metres, Y up, front +Z and floor Y=0; theta 0°, phi 90°, orientation 0°. Original images packaged without pixel changes; cameras and lights are present only in Blender and excluded from the GLB.