About this model

Roda da Sorte — approximate three-dimensional reconstruction. 1000(W)×1800(H)×125(D) mm; disc diameter, axle and foot bounds are missing. 1×1,8×0,125 m panel according to the page. Disc diameter approximately 85 cm, axle position, projection and 40 cm feet estimated from the images. The wooden slats and white panels are printed graphics, not joinery elements. The disc is separate geometry, with thickness and an axle; the mechanism is not animated. Black reverse without documented artwork. Calibration includes supports and the projecting disc. LED/backlit version not shown. The AR scale includes the modelled overall bounds; it is not a technical drawing or a manufacturing dimension. Illustrative 3D model at approximate scale. The dimensions shown relate to the reconstruction; feet, thicknesses and components without complete dimensions were estimated from the official references. Do not use as a technical or manufacturing drawing. Nominal dimensions available in the official catalogue: 100 × 180 × 12,5 cm (W × H × D). These dimensions do not necessarily represent the total overall bounds including bases and accessories. Product reference: https://poster.digital/loja/roda-da-sorte/ 3D reconstruction notes: 1×1,8×0,125 m panel according to the page. Disc diameter approximately 85 cm, axle position, projection and 40 cm feet estimated from the images. The wooden slats and white panels are printed graphics, not joinery elements. The disc is separate geometry, with thickness and an axle; the mechanism is not animated. Black reverse without documented artwork. Calibration includes supports and the projecting disc. GLB in metres, Y up, front +Z and floor Y=0; theta 0°, phi 90°, orientation 0°. Original images packaged without pixel changes; cameras and lights are present only in Blender and excluded from the GLB.