About this model

Lateral para Tenda 3x3 Personalizada — fabric component for customising the tent, without a frame. Separate component: full rPET Blockout fabric sidewall for a 3×3 m tent. The supporting structure is not included, according to the official page; no roof, legs or bars were added. Published print format: 2.96×2.1 m. This does not confirm the assembled overall bounds. Finished fabric estimated at 2.9×2.05 m, allowing a hem margin; fastening loops and thickness also estimated. Hook-and-loop fastening is documented; the number, open shape and positions of the loops are illustrative, without technical fit tolerances. The fabric is shown stretched out for visualisation and is not freestanding. The commercial option specifies printing on 2 faces. The same graphic is repeated on both sides with correct reading direction, not mirrored. The specific reverse graphic is not confirmed in the photographs, which also show configurations with a white interior. Original graphic from the official image applied through UV mapping without changing pixels. The visible region is sampled and reframed; margins hidden by poles or other parts of the tent are not reconstructed as exact print artwork. GLB in metres, Y up, front +Z, floor Y=0; approximate AR based on the modelled overall bounds. Illustrative model, not a technical drawing or production-ready file. Illustrative 3D model at approximate scale. The dimensions shown relate to the reconstruction; feet, thicknesses and components without complete dimensions were estimated from the official references. Do not use as a technical or manufacturing drawing. Product reference: https://poster.digital/loja/lateral-para-tenda-3x3-personalizada/ Assembly manuals: https://poster.digital/wp-content/uploads/2026/05/IM023.01-Tenda-Outdoor.pdf 3D reconstruction notes: Separate component: full rPET Blockout fabric sidewall for a 3×3 m tent. The supporting structure is not included, according to the official page; no roof, legs or bars were added. Published print format: 2.96×2.1 m. This does not confirm the assembled overall bounds. Finished fabric estimated at 2.9×2.05 m, allowing a hem margin; fastening loops and thickness also estimated. Hook-and-loop fastening is documented; the number, open shape and positions of the loops are illustrative, without technical fit tolerances. The fabric is shown stretched out for visualisation and is not freestanding. The commercial option specifies printing on 2 faces. The same graphic is repeated on both sides with correct reading direction, not mirrored. The specific reverse graphic is not confirmed in the photographs, which also show configurations with a white interior. Original graphic from the official image applied through UV mapping without changing pixels. The visible region is sampled and reframed; margins hidden by poles or other parts of the tent are not reconstructed as exact print artwork. GLB in metres, Y up, front +Z, floor Y=0; approximate AR based on the modelled overall bounds. Illustrative model, not a technical drawing or production-ready file.